Diagbox 7.52/7.53 Citroën C4 1.6 2005
-
- Indlæg: 11
- Tilmeldt: man 6. aug 2018 19:40
- Kontakt:
Diagbox 7.52/7.53 Citroën C4 1.6 2005
Hello everyone,
Please excuse me writing in English.
I just registered here (Sander, 32, from the Netherlands) because I see a lot of info on Diagbox.
Also downloaded the 4.3.4 firmware from here, thank you for that Mikhan.
I have issues connecting to an Citroën C4.
Installing Diagbox on a Win XP machine was very slow but installation went fine.
I got up to 7.52 with the well known Scarymistake version.
I can also read and write firmware to my actia clone (from xcar360, well known for good clones) and I can open Diagbox and the interface is recognized.
But when I connect to the C4, turn on ignition (no ECO mode), I get no connection.
Autodetect of manual entering VIN and RPO does not work, I start the Lexia application (not PP2000).
I then experimented with different firmwares (4.3.2 was on my Actia and the last time I used it, it worked fine on this same C4, but the laptop crashed and had to install it all again after 3 years not using the cable). I tried 4.3.3 and 4.3.4 from here but no result.
Then updated to version 8.17 and later 8.52 but still no connection.
Then tried to VM Ware machines that should work, disconnected internet and connected the actia (which was installed and recognized in the VM).
Also, no connection to the C4.
Is anyone able to tell me what version diagbox I should use with which firmware and maybe there is something I mis?
The C4 runs, but gives an emmission MIL after starting.
I want to read, fix and clear the MIL.
Thank you in advance.
With regards,
Sander.
Please excuse me writing in English.
I just registered here (Sander, 32, from the Netherlands) because I see a lot of info on Diagbox.
Also downloaded the 4.3.4 firmware from here, thank you for that Mikhan.
I have issues connecting to an Citroën C4.
Installing Diagbox on a Win XP machine was very slow but installation went fine.
I got up to 7.52 with the well known Scarymistake version.
I can also read and write firmware to my actia clone (from xcar360, well known for good clones) and I can open Diagbox and the interface is recognized.
But when I connect to the C4, turn on ignition (no ECO mode), I get no connection.
Autodetect of manual entering VIN and RPO does not work, I start the Lexia application (not PP2000).
I then experimented with different firmwares (4.3.2 was on my Actia and the last time I used it, it worked fine on this same C4, but the laptop crashed and had to install it all again after 3 years not using the cable). I tried 4.3.3 and 4.3.4 from here but no result.
Then updated to version 8.17 and later 8.52 but still no connection.
Then tried to VM Ware machines that should work, disconnected internet and connected the actia (which was installed and recognized in the VM).
Also, no connection to the C4.
Is anyone able to tell me what version diagbox I should use with which firmware and maybe there is something I mis?
The C4 runs, but gives an emmission MIL after starting.
I want to read, fix and clear the MIL.
Thank you in advance.
With regards,
Sander.
- mikhan
- Moderator
- Indlæg: 2391
- Tilmeldt: man 27. feb 2017 08:33
- Geografisk sted: Vestlolland 4913
- Diagbox: Ja
- Version: V.9.125 + andre
Re: Diagbox 7.52/7.53 Citroën C4 1.6 2005
If you are using XP, then V.7.62 is max.
Maybe your problem ???
Send me an email via my profile here for more.
Mvh Mikael
Maybe your problem ???
Send me an email via my profile here for more.
Mvh Mikael
mikhan = Mikael Hansen
Xsara II 2.0 16 V Break EXCLUSIVE dec. 2001 ca. 252.000 km.. VF7N2RFN173308494 Skrottet.
Peugeot Partner 1,6 hdi 92 hk. 2007 ca 365.000 km. (Ex. kone bil) Skrottet.
Har fungerende Diagbox. PP 2000 og Lexia 3 (Rev C/ V8.55/9.68 m.fl) Skal du have en udlæsning så, send en besked
Flash af gammelt rev B til det nyere rev C udføres online inkl. ny software..
Xsara II 2.0 16 V Break EXCLUSIVE dec. 2001 ca. 252.000 km.. VF7N2RFN173308494 Skrottet.
Peugeot Partner 1,6 hdi 92 hk. 2007 ca 365.000 km. (Ex. kone bil) Skrottet.
Har fungerende Diagbox. PP 2000 og Lexia 3 (Rev C/ V8.55/9.68 m.fl) Skal du have en udlæsning så, send en besked
Flash af gammelt rev B til det nyere rev C udføres online inkl. ny software..
-
- Indlæg: 11
- Tilmeldt: man 6. aug 2018 19:40
- Kontakt:
Re: Diagbox 7.52/7.53 Citroën C4 1.6 2005
I also have a vmware image with windows 7 and diagbox 7.83.
Should work.
With diagbox 7.62 I need firmware 4.3.2 or 4.3.3?
Should work.
With diagbox 7.62 I need firmware 4.3.2 or 4.3.3?
- mikhan
- Moderator
- Indlæg: 2391
- Tilmeldt: man 27. feb 2017 08:33
- Geografisk sted: Vestlolland 4913
- Diagbox: Ja
- Version: V.9.125 + andre
Re: Diagbox 7.52/7.53 Citroën C4 1.6 2005
I have never seen any firmware make a difference. ???
So not your problem, I think ??
Mvh Mikael
mikhan = Mikael Hansen
Xsara II 2.0 16 V Break EXCLUSIVE dec. 2001 ca. 252.000 km.. VF7N2RFN173308494 Skrottet.
Peugeot Partner 1,6 hdi 92 hk. 2007 ca 365.000 km. (Ex. kone bil) Skrottet.
Har fungerende Diagbox. PP 2000 og Lexia 3 (Rev C/ V8.55/9.68 m.fl) Skal du have en udlæsning så, send en besked
Flash af gammelt rev B til det nyere rev C udføres online inkl. ny software..
Xsara II 2.0 16 V Break EXCLUSIVE dec. 2001 ca. 252.000 km.. VF7N2RFN173308494 Skrottet.
Peugeot Partner 1,6 hdi 92 hk. 2007 ca 365.000 km. (Ex. kone bil) Skrottet.
Har fungerende Diagbox. PP 2000 og Lexia 3 (Rev C/ V8.55/9.68 m.fl) Skal du have en udlæsning så, send en besked
Flash af gammelt rev B til det nyere rev C udføres online inkl. ny software..
- mikhan
- Moderator
- Indlæg: 2391
- Tilmeldt: man 27. feb 2017 08:33
- Geografisk sted: Vestlolland 4913
- Diagbox: Ja
- Version: V.9.125 + andre
Re: Diagbox 7.52/7.53 Citroën C4 1.6 2005
From Vista and newer, your interface must be rev C .. Otherwise, no Lexia. Only diagbox.
mikhan = Mikael Hansen
Xsara II 2.0 16 V Break EXCLUSIVE dec. 2001 ca. 252.000 km.. VF7N2RFN173308494 Skrottet.
Peugeot Partner 1,6 hdi 92 hk. 2007 ca 365.000 km. (Ex. kone bil) Skrottet.
Har fungerende Diagbox. PP 2000 og Lexia 3 (Rev C/ V8.55/9.68 m.fl) Skal du have en udlæsning så, send en besked
Flash af gammelt rev B til det nyere rev C udføres online inkl. ny software..
Xsara II 2.0 16 V Break EXCLUSIVE dec. 2001 ca. 252.000 km.. VF7N2RFN173308494 Skrottet.
Peugeot Partner 1,6 hdi 92 hk. 2007 ca 365.000 km. (Ex. kone bil) Skrottet.
Har fungerende Diagbox. PP 2000 og Lexia 3 (Rev C/ V8.55/9.68 m.fl) Skal du have en udlæsning så, send en besked
Flash af gammelt rev B til det nyere rev C udføres online inkl. ny software..
-
- Indlæg: 11
- Tilmeldt: man 6. aug 2018 19:40
- Kontakt:
Re: Diagbox 7.52/7.53 Citroën C4 1.6 2005
It would seem different (higher) version need higher versions of firmware, but I could be mistaking.
Any other tips? Do I need to do something special with the car? Can I check the interface? I don't have an other Peugeot or Citroën to try.
It is rev. C, came shipped this way. And it has worked before but I can't remember how or what I installed on which OS...
It is a while ago so not higher then 7.82.
And I think on windows xp because this was always recommended.
Can anyone upload 4.3.3? I have 4.3.2. and 4.3.4.
Will just try it
Any other tips? Do I need to do something special with the car? Can I check the interface? I don't have an other Peugeot or Citroën to try.
It is rev. C, came shipped this way. And it has worked before but I can't remember how or what I installed on which OS...
It is a while ago so not higher then 7.82.
And I think on windows xp because this was always recommended.
Can anyone upload 4.3.3? I have 4.3.2. and 4.3.4.
Will just try it
-
- Indlæg: 511
- Tilmeldt: tors 16. mar 2017 09:19
- Geografisk sted: Struer
- Diagbox: Ja
- Kontakt:
Re: Diagbox 7.52/7.53 Citroën C4 1.6 2005
have you successfully connected to another car with your interface?
When I received my interface, the big IC inside it was not soldered on one of the sides.
I soldered it an dthen it worked. Just a thought.
Br John
When I received my interface, the big IC inside it was not soldered on one of the sides.
I soldered it an dthen it worked. Just a thought.
Br John
Struer - kan montere/afbalancere dæk og presse hydraulikslanger
Har Diagbox 7.02
407SW 1.6HDI 2005
Renault Scenic III 7sæder 1.5dci 2011
Har Diagbox 7.02
407SW 1.6HDI 2005
Renault Scenic III 7sæder 1.5dci 2011
-
- Indlæg: 11
- Tilmeldt: man 6. aug 2018 19:40
- Kontakt:
Re: Diagbox 7.52/7.53 Citroën C4 1.6 2005
It worked before, on the same Citroën C4 and on a Peugeot 106.
Then laptop crashed, never needed the cable untill now, re-installed and problems occurred.
Peugeot ia gone now, have no other PSA cars.
Then laptop crashed, never needed the cable untill now, re-installed and problems occurred.
Peugeot ia gone now, have no other PSA cars.
- mikhan
- Moderator
- Indlæg: 2391
- Tilmeldt: man 27. feb 2017 08:33
- Geografisk sted: Vestlolland 4913
- Diagbox: Ja
- Version: V.9.125 + andre
Re: Diagbox 7.52/7.53 Citroën C4 1.6 2005
I may be able to see your problem online .. For example. via the Teamviewer program ???
Mvh Mikael
Mvh Mikael
mikhan = Mikael Hansen
Xsara II 2.0 16 V Break EXCLUSIVE dec. 2001 ca. 252.000 km.. VF7N2RFN173308494 Skrottet.
Peugeot Partner 1,6 hdi 92 hk. 2007 ca 365.000 km. (Ex. kone bil) Skrottet.
Har fungerende Diagbox. PP 2000 og Lexia 3 (Rev C/ V8.55/9.68 m.fl) Skal du have en udlæsning så, send en besked
Flash af gammelt rev B til det nyere rev C udføres online inkl. ny software..
Xsara II 2.0 16 V Break EXCLUSIVE dec. 2001 ca. 252.000 km.. VF7N2RFN173308494 Skrottet.
Peugeot Partner 1,6 hdi 92 hk. 2007 ca 365.000 km. (Ex. kone bil) Skrottet.
Har fungerende Diagbox. PP 2000 og Lexia 3 (Rev C/ V8.55/9.68 m.fl) Skal du have en udlæsning så, send en besked
Flash af gammelt rev B til det nyere rev C udføres online inkl. ny software..
-
- Indlæg: 11
- Tilmeldt: man 6. aug 2018 19:40
- Kontakt:
Re: Diagbox 7.52/7.53 Citroën C4 1.6 2005
That is very kind of you.
One version is in Dutch, so that will be a problem.
Win 7 VM is in english, I don't know of teamviewer wil allow you to see the virtual machines though. We'll have to try.
I will re-install a clean win xp with 7.62 and Teamviewer, try it myself first and then let you know the result and if TV is needed.
Thanks!
One version is in Dutch, so that will be a problem.
Win 7 VM is in english, I don't know of teamviewer wil allow you to see the virtual machines though. We'll have to try.
I will re-install a clean win xp with 7.62 and Teamviewer, try it myself first and then let you know the result and if TV is needed.
Thanks!
- mikhan
- Moderator
- Indlæg: 2391
- Tilmeldt: man 27. feb 2017 08:33
- Geografisk sted: Vestlolland 4913
- Diagbox: Ja
- Version: V.9.125 + andre
Re: Diagbox 7.52/7.53 Citroën C4 1.6 2005
Dutch is no problem .. Have once installed Diagbox V.7.83 for one in China .. Via Teamviever..
That was exciting
That was exciting
mikhan = Mikael Hansen
Xsara II 2.0 16 V Break EXCLUSIVE dec. 2001 ca. 252.000 km.. VF7N2RFN173308494 Skrottet.
Peugeot Partner 1,6 hdi 92 hk. 2007 ca 365.000 km. (Ex. kone bil) Skrottet.
Har fungerende Diagbox. PP 2000 og Lexia 3 (Rev C/ V8.55/9.68 m.fl) Skal du have en udlæsning så, send en besked
Flash af gammelt rev B til det nyere rev C udføres online inkl. ny software..
Xsara II 2.0 16 V Break EXCLUSIVE dec. 2001 ca. 252.000 km.. VF7N2RFN173308494 Skrottet.
Peugeot Partner 1,6 hdi 92 hk. 2007 ca 365.000 km. (Ex. kone bil) Skrottet.
Har fungerende Diagbox. PP 2000 og Lexia 3 (Rev C/ V8.55/9.68 m.fl) Skal du have en udlæsning så, send en besked
Flash af gammelt rev B til det nyere rev C udføres online inkl. ny software..
-
- Indlæg: 11
- Tilmeldt: man 6. aug 2018 19:40
- Kontakt:
Re: Diagbox 7.52/7.53 Citroën C4 1.6 2005
FYI: Just tried it again with the downloaded VM's.
Changed to 4.3.4.
Both VM's:
WinXP image uses 7.83
Win7 images uses 7.82
both no single response.
Just like the car isn't there.
Now installing WinXP on dedicated laptop (no VM).
will return here soon.
Changed to 4.3.4.
Both VM's:
WinXP image uses 7.83
Win7 images uses 7.82
both no single response.
Just like the car isn't there.
Now installing WinXP on dedicated laptop (no VM).
will return here soon.
- Carsten S
- Site Admin
- Indlæg: 1765
- Tilmeldt: ons 8. feb 2017 20:33
- Geografisk sted: 8653 Them
- Diagbox: Ja
- Version: 8.xx
- Kontakt:
Re: Diagbox 7.52/7.53 Citroën C4 1.6 2005
Welcome, writing in English is fine
Have you checked the fuse to the OBD-connector? I've seen several models, where the fuse was blown (the fuse also handles a rear 12V output on some models)
Vbat should be present between pin 4 and 16 in the OBD-connector, please verify.
Have you checked the fuse to the OBD-connector? I've seen several models, where the fuse was blown (the fuse also handles a rear 12V output on some models)
Vbat should be present between pin 4 and 16 in the OBD-connector, please verify.
2001 Citroën C5 V6 Aut.
2007 Citroën C5 V6 Aut.
Diagbox V8.xx, V9.xx original, VCDS, Ford/Mazda IDS, Actia MultiDiag 2018.
2007 Citroën C5 V6 Aut.
Diagbox V8.xx, V9.xx original, VCDS, Ford/Mazda IDS, Actia MultiDiag 2018.
-
- Indlæg: 11
- Tilmeldt: man 6. aug 2018 19:40
- Kontakt:
Re: Diagbox 7.52/7.53 Citroën C4 1.6 2005
Uhm... No.. did think about it.
Will meassure. Where can I find the fuse?
Will meassure. Where can I find the fuse?
-
- Indlæg: 11
- Tilmeldt: man 6. aug 2018 19:40
- Kontakt:
-
- Indlæg: 11
- Tilmeldt: man 6. aug 2018 19:40
- Kontakt:
Re: Diagbox 7.52/7.53 Citroën C4 1.6 2005
Well, just did a clean install of win xp x32 sp3, diagvox 7.02 install, then 7.xx to 7.58 update.
Reloaded old firmware and let diagbox update to 4.3.2 (checked) and still no connection.
No automatic vin detection, no connection after manually entering vin.
I'm out of options for the software.
Will open the actia vci to check for burnmarks or maybe lose cables.
Reloaded old firmware and let diagbox update to 4.3.2 (checked) and still no connection.
No automatic vin detection, no connection after manually entering vin.
I'm out of options for the software.
Will open the actia vci to check for burnmarks or maybe lose cables.
- mikhan
- Moderator
- Indlæg: 2391
- Tilmeldt: man 27. feb 2017 08:33
- Geografisk sted: Vestlolland 4913
- Diagbox: Ja
- Version: V.9.125 + andre
Re: Diagbox 7.52/7.53 Citroën C4 1.6 2005
1. Does your interface appear as in my picture ??
2. Is there a check mark when you have selected Citroen / C4 ??
2. Is there a check mark when you have selected Citroen / C4 ??
mikhan = Mikael Hansen
Xsara II 2.0 16 V Break EXCLUSIVE dec. 2001 ca. 252.000 km.. VF7N2RFN173308494 Skrottet.
Peugeot Partner 1,6 hdi 92 hk. 2007 ca 365.000 km. (Ex. kone bil) Skrottet.
Har fungerende Diagbox. PP 2000 og Lexia 3 (Rev C/ V8.55/9.68 m.fl) Skal du have en udlæsning så, send en besked
Flash af gammelt rev B til det nyere rev C udføres online inkl. ny software..
Xsara II 2.0 16 V Break EXCLUSIVE dec. 2001 ca. 252.000 km.. VF7N2RFN173308494 Skrottet.
Peugeot Partner 1,6 hdi 92 hk. 2007 ca 365.000 km. (Ex. kone bil) Skrottet.
Har fungerende Diagbox. PP 2000 og Lexia 3 (Rev C/ V8.55/9.68 m.fl) Skal du have en udlæsning så, send en besked
Flash af gammelt rev B til det nyere rev C udføres online inkl. ny software..
-
- Indlæg: 11
- Tilmeldt: man 6. aug 2018 19:40
- Kontakt:
Re: Diagbox 7.52/7.53 Citroën C4 1.6 2005
Yes and yes
Drivers are installed and working, I can also update the firmware qath psa checker.
Teamviewer is now installed if you are still willing to
Drivers are installed and working, I can also update the firmware qath psa checker.
Teamviewer is now installed if you are still willing to
- mikhan
- Moderator
- Indlæg: 2391
- Tilmeldt: man 27. feb 2017 08:33
- Geografisk sted: Vestlolland 4913
- Diagbox: Ja
- Version: V.9.125 + andre
Re: Diagbox 7.52/7.53 Citroën C4 1.6 2005
You will receive an email in a few minutes
mikhan = Mikael Hansen
Xsara II 2.0 16 V Break EXCLUSIVE dec. 2001 ca. 252.000 km.. VF7N2RFN173308494 Skrottet.
Peugeot Partner 1,6 hdi 92 hk. 2007 ca 365.000 km. (Ex. kone bil) Skrottet.
Har fungerende Diagbox. PP 2000 og Lexia 3 (Rev C/ V8.55/9.68 m.fl) Skal du have en udlæsning så, send en besked
Flash af gammelt rev B til det nyere rev C udføres online inkl. ny software..
Xsara II 2.0 16 V Break EXCLUSIVE dec. 2001 ca. 252.000 km.. VF7N2RFN173308494 Skrottet.
Peugeot Partner 1,6 hdi 92 hk. 2007 ca 365.000 km. (Ex. kone bil) Skrottet.
Har fungerende Diagbox. PP 2000 og Lexia 3 (Rev C/ V8.55/9.68 m.fl) Skal du have en udlæsning så, send en besked
Flash af gammelt rev B til det nyere rev C udføres online inkl. ny software..
- mikhan
- Moderator
- Indlæg: 2391
- Tilmeldt: man 27. feb 2017 08:33
- Geografisk sted: Vestlolland 4913
- Diagbox: Ja
- Version: V.9.125 + andre
Re: Diagbox 7.52/7.53 Citroën C4 1.6 2005
Check 16 and 4/5 .. and number 1.. Check for bent legs in the OBD2 connector/Interface
mikhan = Mikael Hansen
Xsara II 2.0 16 V Break EXCLUSIVE dec. 2001 ca. 252.000 km.. VF7N2RFN173308494 Skrottet.
Peugeot Partner 1,6 hdi 92 hk. 2007 ca 365.000 km. (Ex. kone bil) Skrottet.
Har fungerende Diagbox. PP 2000 og Lexia 3 (Rev C/ V8.55/9.68 m.fl) Skal du have en udlæsning så, send en besked
Flash af gammelt rev B til det nyere rev C udføres online inkl. ny software..
Xsara II 2.0 16 V Break EXCLUSIVE dec. 2001 ca. 252.000 km.. VF7N2RFN173308494 Skrottet.
Peugeot Partner 1,6 hdi 92 hk. 2007 ca 365.000 km. (Ex. kone bil) Skrottet.
Har fungerende Diagbox. PP 2000 og Lexia 3 (Rev C/ V8.55/9.68 m.fl) Skal du have en udlæsning så, send en besked
Flash af gammelt rev B til det nyere rev C udføres online inkl. ny software..