Problemer med udlæsning af fejlkoder
- Mamahoho
- Indlæg: 43
- Tilmeldt: man 9. jul 2018 14:23
- Geografisk sted: 4690 Haslev
- Diagbox: Ja
- Version: 9.68
- Kontakt:
Problemer med udlæsning af fejlkoder
Prøver forgæves at udlæse koder på Berlingo 2016 via Diagbox. Det virker som om Diagbox ikke kan kommunikere med bilen. Er version 07.02 bare for gammel? Softwaren afvikles på en stand alone Windows NT maskine uden forbindelse til Internettet.
Du har ikke tilladelse til at få vist vedhæftede filer i dette indlæg.
Citroen Berlingo 2016 1,6 BlueHDI 100 ETG6
195.XXX km
Peugeot 107 2014
204.XXX km
Mitsubishi Colt 2010 1,3 AllShift
123.XXX km
195.XXX km
Peugeot 107 2014
204.XXX km
Mitsubishi Colt 2010 1,3 AllShift
123.XXX km
-
- Indlæg: 174
- Tilmeldt: ons 26. dec 2018 17:36
- Geografisk sted: Deutschland Würzburg
- Diagbox: Ja
- Version: 9.150 + ältere
- Kontakt:
Re: Problemer med udlæsning af fejlkoder
The 7.02 is unsuitable for a 2016 vehicle.
Even with possible updates up to 7.82/7.83, it will only last until mid-2015.
The software 9.xx is required, which can either be installed on a VM or can be installed and activated directly for a small fee.
A laptop with WIN 10 64 Bit Pro is ideal for this.
The VCI should be a full chip interface.
Under this menu item "Diagbox" there are already detailed contributions - there you will also find the corresponding helpers.
Greetings Wolfgang
Even with possible updates up to 7.82/7.83, it will only last until mid-2015.
The software 9.xx is required, which can either be installed on a VM or can be installed and activated directly for a small fee.
A laptop with WIN 10 64 Bit Pro is ideal for this.
The VCI should be a full chip interface.
Under this menu item "Diagbox" there are already detailed contributions - there you will also find the corresponding helpers.
Greetings Wolfgang
- Mamahoho
- Indlæg: 43
- Tilmeldt: man 9. jul 2018 14:23
- Geografisk sted: 4690 Haslev
- Diagbox: Ja
- Version: 9.68
- Kontakt:
Re: Problemer med udlæsning af fejlkoder
Okay, det system får jeg ikke lige op og køre foreløbig, har ikke engang en PC til formålet. Er der nogen på Sydsjælland der har en fungerende Diagbox 9.XX der kan udlæse på koder på bilen? Jeg bor i 4690 Haslev, men jeg ved ikke hvor langt jeg tør køre med de røde lamper!
Citroen Berlingo 2016 1,6 BlueHDI 100 ETG6
195.XXX km
Peugeot 107 2014
204.XXX km
Mitsubishi Colt 2010 1,3 AllShift
123.XXX km
195.XXX km
Peugeot 107 2014
204.XXX km
Mitsubishi Colt 2010 1,3 AllShift
123.XXX km
-
- Indlæg: 174
- Tilmeldt: ons 26. dec 2018 17:36
- Geografisk sted: Deutschland Würzburg
- Diagbox: Ja
- Version: 9.150 + ältere
- Kontakt:
Re: Problemer med udlæsning af fejlkoder
Addendum:
The 7.02 only goes up to approx. 2013.
The 9.68 VM - extends until approx. 5/2021 can also be installed on a WIN 7 64 bit, provided the PC can be virtualised.
A direct installation - without VM - is also possible until 9.125/9.129 ( until 5/2022) on a WIN 7 6+4 bit - activation about 10€.
Google: DIAGBOX JTR (John The Ripper).
Greetings Wolfgang
The 7.02 only goes up to approx. 2013.
The 9.68 VM - extends until approx. 5/2021 can also be installed on a WIN 7 64 bit, provided the PC can be virtualised.
A direct installation - without VM - is also possible until 9.125/9.129 ( until 5/2022) on a WIN 7 6+4 bit - activation about 10€.
Google: DIAGBOX JTR (John The Ripper).
Greetings Wolfgang
- Mamahoho
- Indlæg: 43
- Tilmeldt: man 9. jul 2018 14:23
- Geografisk sted: 4690 Haslev
- Diagbox: Ja
- Version: 9.68
- Kontakt:
Re: Problemer med udlæsning af fejlkoder
Fejlen er fundet og udbedret, men fejlen skal slettes fra bilens egendiagnosesystem. Er der overhovedet ingen øst for Storebælt med Diagbox 9.XXX der har mulighed for det?
Citroen Berlingo 2016 1,6 BlueHDI 100 ETG6
195.XXX km
Peugeot 107 2014
204.XXX km
Mitsubishi Colt 2010 1,3 AllShift
123.XXX km
195.XXX km
Peugeot 107 2014
204.XXX km
Mitsubishi Colt 2010 1,3 AllShift
123.XXX km