Citroënforum.dk

How to Use Diagbox 9.68 Free VMWARE English Image
(From VMWARE Player 12 UP with USB 3.0 Support)

0. Extract Content of archive to any folder you want.
1. Install VMWare Player if you don't have it already and reboot your computer after install(see Player Folder).
2. Create a shortcut on your Desktop from file Diagbox_968_Free.vmx
3. Click on previous created shortcut and the VM will RUN
4. Very Important !!!!!! - On first run when asked choose option "I MOVED IT" and not another !!!!!!!!!!
5. When VM is fully launched connect your interface to USB port and you will be asked to connect it to the VM, do it.
6. Run Diagbox from VM and it will upgrade your interface to latest firmware then it will work.

Download:
https://mega.nz/folder/1JowmaSS#9BS7jdF9FdFk6xfkRMr-zA

Hi,
again as a repetition:
VM 9.68 (as of 4/2020) is available for free download in various forums. It only works properly and quickly on a 64-bit system (WIN10 / WIN7) and if possible with a 4 core processor and 8 GB RAM and the laptop must be visualizable otherwise the VM cannot be installed.
The original DB from MrRorry - 9.96 (status 3/2021) can also be installed on a PC with a 2 core processor and 4 GB RAM and WIN7 32 bit as well as on 64 bit WIN7 and WIN10. No virtualization required - this means that older and cheaper laptops can also be used. Installation is a little more complicated and the activation code costs € 50.
Info: Forum https://www.tlemcen-electronic.com/forum/index.php.

If you have any doubts or questions, there is a Diagbox expert here in this forum.
mikhan = Mikael Hansen

Greetings Wolfgang

Er dette den samme som Tools4car sælger ???

Tools4car is recommendable - also all others are more or less completely identical - whereas Tools4car offers quite good installation videos in different languages.
But in the meantime there is VM Stand 4/2022 = Diagbox 9.125 (9.129).
Advantages of a VM: very simple and quick installation and the laptop can be used well for other purposes.
Disadvantages: the laptop must be newer because virtualisation is a condition and it needs a few more clicks for diagnosis.
In the meantime, version 9.129 without VM installation is available for 10€ activation donation - preferably WIN 10 64 bit - e.g. from JTR or PSA-Diag.FR.
Disadvantage: No virus programme - Defender must be permanently off - the laptop should only be used for diagnosis if possible.
Advantage: Latest version with mostly free updates.
Greetings Wolfgang

Hej med jer :-) . Jeg prøver at hente diax 9.68 men når mega begynder at hente zipfil fra link giver den fejl med den ene fil bryder regler og ikke kan ikke hentes. Andre der hsr oplevet det. Eller har et link der virker ? :-)
På forhånd tak

Tror det lykkedes :-) . Hentede som filer isteden for zip

Diagbox 9.68 was yesterday
9.125 (9.129) is current