Tandremskift

Besvar
MariasC1Dyt
Indlæg: 1
Tilmeldt: lør 14. jan 2023 13:22
Kontakt:

Tandremskift

Ulæst indlæg af MariasC1Dyt » lør 14. jan 2023 13:32

Hej.
Hvor tit skal man skifte tandrem på en C1 1,2 ?
Min er fra 2017 og har kørt 38000. Alle service overholdt. Citroen siger efter 5 år - altså nu, og vil have 10k for det.
Nogle der har gode råd ?

Nego2403
Indlæg: 165
Tilmeldt: fre 23. apr 2021 08:38
Geografisk sted: Herning
Diagbox: Ja
Version: 9.68, 9.91
Kontakt:

Re: Tandremskift

Ulæst indlæg af Nego2403 » lør 14. jan 2023 23:42

5 år eller 100.000 km. Den er særdeles besværlig at skifte, da tandremmen er i olie. Hvis du har lidt teknisk snilde, og viden om motorer, så burde du godt kunne klare det. Jeg gjorde det for nylig i min indkørsel, det tog mig 8 timer at lave.

Du kan tjekke tandremmen, hvis du tager oliepåfyldningslåget af. Hvis du tydeligt kan se at der er revner i tandremmen eller at tandremmen er ru, så burde du skifte den.

Hvis du bestemmer dig for at du selv vil lave det, så er der noget specialværktøj man skal bruge til at låse knasterne og krumtappen. Jeg har det liggende, hvis det skulle være.
2016 Citroën C3 A51 1.6 BlueHdi 100 (DV6FD)
Diagbox V9.68

cit-rotti
Indlæg: 110
Tilmeldt: ons 26. dec 2018 17:36
Geografisk sted: Deutschland Würzburg
Diagbox: Ja
Version: 9.96 + ältere
Kontakt:

Re: Tandremskift

Ulæst indlæg af cit-rotti » søn 15. jan 2023 16:49

There are some good articles on youtube about changing the timing belt. The tools for locking the camshafts and fitting the water pump belt can be bought cheaply in Poland and England (approx. 55-60€).
The biggest work is to dismantle everything to be able to lock the camshafts.

The most important thing is to always use only the engine oil prescribed by PSA and more frequent oil changes are also beneficial.

It is even better not only to change the timing belt, but also to remove the oil pan and clean the oil pump strainer. Most engines die because the abrasion of the timing belt clogs the oil pump and then the oil pressure is missing.

I can share the YouTube posts etc. on request.

Greetings Wolfgang

Nego2403
Indlæg: 165
Tilmeldt: fre 23. apr 2021 08:38
Geografisk sted: Herning
Diagbox: Ja
Version: 9.68, 9.91
Kontakt:

Re: Tandremskift

Ulæst indlæg af Nego2403 » søn 15. jan 2023 20:38

cit-rotti skrev:
søn 15. jan 2023 16:49
There are some good articles on youtube about changing the timing belt. The tools for locking the camshafts and fitting the water pump belt can be bought cheaply in Poland and England (approx. 55-60€).
The biggest work is to dismantle everything to be able to lock the camshafts.

The most important thing is to always use only the engine oil prescribed by PSA and more frequent oil changes are also beneficial.

It is even better not only to change the timing belt, but also to remove the oil pan and clean the oil pump strainer. Most engines die because the abrasion of the timing belt clogs the oil pump and then the oil pressure is missing.

I can share the YouTube posts etc. on request.

Greetings Wolfgang
Yes I forgot to mention the oil pan. I actually did that too when I changed the timing belt. Luckily there was almost no debris in the strainer. The worst part was removing the oil pan as the RTV was holding it really good. I used a putty knife and carefully cut the RTV without bending the oil pan or scratching the mating surface of the engine block.
2016 Citroën C3 A51 1.6 BlueHdi 100 (DV6FD)
Diagbox V9.68

Besvar